Knowledge Base

NatureSync™ Quick Start Guide

Latest Update: 12/11/2012

1

Select NatureSync Mode

Go to “Settings” by pressing “SET” key at standby menu. Choose “Select Mode” using “+” or “-” and press “SET” to select. Choose “NatureSync”.


2

Set Location

Go to “Settings” by pressing “SET” key at standby menu. Choose “Location” using “+” or “-” and press “SET” to select.


You can choose one of the preset locations by using “Select Your City


Or input your location manually by choosing “input location”


You can get your longitude and latitude from GPS devices or online maps service providers like Google Maps

3

Set Date

Go to “Settings” by pressing “SET” key at standby menu. Choose “Date” using “+” or “-” and press “SET” to select.

4

Set Time

Go to “Settings” by pressing “SET” key at standby menu. Choose “Time” using “+” or “-” and press “SET” to select.

5

Configure NatureSync’s Main Brightness

Go to “Settings” by pressing “SET” key at standby menu. Choose “NatureSync” using “+” or “-” and press “SET” to select.

Choose “Main Brightness”. Changing Main Brightness will affect the maximum brightness of your lights (the brightness after sunrise) and affect other relative brightness

6

Set “Sunrise Offset” “Sunset Offset”

Go to “Settings->NatureSync->Sunrise Offset” or “Sunset Offset”



Using “Sunrise Offset” or “Sunset Offset” to change the sunrise and sunset start time relatively to the currently nature sunrise and sunset time at your location. For example, nature sunrise is 6:05am, using “+0:30 Hour” sunrise offset will change the NatureSync’s sunrise start time to 6:35am.

You can use “shortcut” menu’s “Preview Schedule” to see the changes on sunset/sunrise time. Press “M” Key, and choose “Preview Schedule”

7

NatureSync: Change sunrise, sunset durations

Go to “Settings -> NatureSync -> Durations”

facebook page visit twitter rss feed newsletter